This is for selling (or giving away) some of my personal items that are both hard-to-find and in low demand. Thus they need to be kept listed for years. Contact me at mailto:dave@lafn.org. Be sure that the subject heading of the email clearly shows what you might be interested in buying, otherwise the email may be reported as spam. I am very active in fighting spam and my efforts have gotten hundreds of spammers blacklisted.
1987 Acura Integra factory service manual. By Honda Motor Co.
First edition 9/86. Printed in Japan. Over 600 pages. $15
Special Wrench for crank cup (on bottom bracket) for DBS Bicycle
(purchased about 1975 from Norway). $20
General purpose bicycle wrench: 3 3/4" long for antique
bicycles. 7/16" box end (hex) on one end. 3/8" and 9 mm open ends
on other end. Also has notch for use as spoke wrench but will only
rotate about 1/3 turn before you have to reposition it. Crude tire
iron tip which might slip. Made of 10 gage steel (color black).
$3
Price of above items includes shipping within the United States.
-------------------------------------------------------------------------
14 inch used Spanish S tile (roofing); 13 1/2 inch rakes.
Field tile: 14 inch to 14 1/4 inch, by 11 inch wide. These field pieces are of inferior quality made in about 1922 by "A Pressed Brick Co" which likely was located near Los Angeles, California. Note the name is deceptively similar to "LA Pressed Brick Co." which made good quality roofing tiles. Most of mine developed cracks and I only have about 20 pieces left which have no major crascks in them. Will give these away free but they may also eventually crack over time and you should use them only as a last resort.
Spanish S rakes: 5 pieces for both right and left sides (10
pieces total). They are labeled RRB (right gable rakes) and LRB
(left gable rakes) and none of them ever cracked (no "A Pressed
Brick Co." labels). They are slightly shorter than the 14-inch
field pieces.
5 @ right rakes: 13 1/4 inch to 13 3/8 inch, $15 each piece
5 @ left rakes: 13 3/4 inch to 14 inch, $10 each piece
You'll also need to pay for shipping and handling unless you can pick them up in Pasadena, California.
----------------------------------------------------------------------------
Tent poles for REI dome tent, probably from 1980's. When assembled, poles are 3@ 159" and 1@ 82". They are aluminum, in short sections with shock-cord in the center which keeps the sections of a pole together when disassembled. I bounght a used REI tent but got 2 sets of poles. Some are slightly bent (curved) but they work fine. Free, but you need to pay for shipping and handling.